BMW M GmbH is presenting another exclusive, limited-run special-edition model in the shape of the new BMW M3 CS (fuel consumption combined: 8.3 l/100 km [34.0 mpg imp]*; CO2 emissions combined: 194 g/km*). With its accentuated sporting presence, the new M3 CS continues the decades-long tradition of successful M special editions which began in 1988 with the E30 BMW M3 Evolution. At the same time, the four-door high-performance sedan serves up a perfect blend of dynamism and everyday practicality.

The 3.0-litre high-performance engine exceeds the output of the M3 with Competition Package by 10 horsepower, raising it to 460 hp. State-of-the-art M TwinPower Turbo technology propels the M3 CS from 0 to 100 km/h (62 mph) in just 3.9 seconds. The top speed of the new special edition, which comes as standard with the M Driver’s Package, is electronically limited to 280 km/h (174 mph).

With its two mono-scroll turbochargers, charge air cooler, High Precision Injection, VALVETRONIC variable valve timing and Double-VANOS fully variable camshaft timing, the six-cylinder in-line engine takes a clear and consistent aim at the higher echelons of performance, but is equally committed to developing significant torque from low engine speeds and achieving high levels of efficiency (fuel consumption combined: 8.3 l/100 km [34.0 mpg imp]*; CO2 emissions combined: 194 g/km*). Pushing the new red start/stop button fires up the engine, and the distinctive sound produced by the specially tuned sports exhaust system of the new BMW M3 CS – with its quartet of tailpipes – proceeds to lay on a feast for the ears.

The new BMW M3 CS is equipped as standard with the seven-speed M Double Clutch Transmission (M DCT) with Drivelogic. This cutting-edge transmission has a separate oil cooler and enables both automated gear changes and manual interventions using the shift paddles on the steering wheel. It changes gears in fractions of a second with no interruption in the flow of power, but employs a long seventh gear to keep revs low and minimise fuel consumption over longer motorway journeys.

The suspension of the new BMW M3 CS largely mirrors that of the M3 with Competition Package. The links and wheel carriers at both the front and rear axles are made from forged aluminium and are therefore extremely light. That keeps the unsprung masses low and benefits driving dynamics. The M3 CS is fitted as standard with Adaptive M suspension, whose geometry has been tuned to deliver optimised performance on both the road and track. Ensuring the best possible grip in all driving conditions are the DSC (Dynamic Stability Control) system – which includes M Dynamic Mode – and the Active M Differential.

The control systems for the Adaptive M suspension, DSC and Active M Differential have been modified to suit the dynamic requirements of the BMW M3 CS, as has the set-up of the electromechanical steering. The driver has the option of adjusting the steering and suspension settings to their personal preferences or the demands of the route at hand. The special edition’s light-alloy wheels (front: 9 J x 19, rear: 10 J x 20) are very much at home on the race track, fitted as they are (as standard) with Michelin Pilot Sport Cup 2 tyres (front: 265/35 R 19, rear: 285/30 R 20). These semi-slick cup tyres, which are also road-legal, provide unbeatable grip and supreme lateral stability at high track speeds. The M3 CS can also be ordered with Michelin Sport road tyres.

Moving inside the new BMW M3 CS, the generous use of two-tone full leather in Silverstone/Black and Alcantara creates a compelling and well-resolved ambience brimming with sporting allure and undeniable class. No M3 CS driver will need to compromise on the nicer things in life. Indeed, among the standard features on board are automatic climate control, a Harman Kardon surround sound system and the Navigation system Professional. True to form, the BMW M GmbH designers have given the new M3 CS looks that reflect the car’s sporting intent. The signature feature of its prominent front end, complete with cutting-edge twin LED headlights, is the front apron with large, three-section air intakes.

The Gurney spoiler lip on the boot lid has been newly designed specifically for the new M3 CS, and teams up with the front splitter and the rear diffuser to help minimise dynamic lift. These components are made from the lightweight and extremely rigid high-tech material carbon fibre-reinforced plastic (CFRP), as are the bonnet and roof of the new BMW M3 CS.

Orders for the new BMW M3 CS can be placed from January 2018. The special-edition model – which will be limited to a run of approximately 1,200 units due to production factors – will be built from March 2018.

*Fuel consumption and CO2 figures are provisional, based on the EU test cycle and may vary depending on the tyre format specified.

Mercedes-AMG will ring in the 2015 motorsport season at the beginning of March with the sonorous sound of the V8 engine: the new Mercedes-AMG GT3, with which the Mercedes-Benz sports car and high-performance brand is systematically expanding its motorsports presence, will be making its debut appearance at the Geneva Motor Show. Developed to comply with the FIA's GT3 race rules, the racing car will compete in the world's most hotly contested customer race series. Cutting-edge racing technology and spectacular design predestine the new challenger for victories. The new GT3 is based on the Mercedes-AMG GT, which is being launched in just a few days' time. Following an intensive test phase, the new AMG racing car will be shipped to the first customer teams at the end of 2015.

The Mercedes-AMG GT3 will blaze new trails in customer sports with its intelligent vehicle concept. The excellent racetrack performance of the standard GT already provides the best possible basis for this. "We are entering a hard-fought and hotly contested competitive environment with the new Mercedes-AMG GT3. The high technological standard and fair race rules are spurring us on to push to take pole position with our new customer racing car. You can only give credible proof of your ambition to lead if you're beating the very best in the game," commented Tobias Moers, Chairman of the Board of Management of Mercedes-AMG GmbH.

The standard Mercedes-AMG GT already provides the ideal prerequisites for the GT3 racing model, with its low centre of gravity, perfect distribution of weight and wide track width. For this layout guarantees precise cornering properties, high lateral acceleration, first-class agility, a high level of traction and low inertia when having to change direction fast. On the different race circuits, all of these attributes give the driver the advantages necessary to achieve top placements.

Even at a standstill, the new Mercedes-AMG GT3 is the embodiment of undiluted power. Its matt paintwork in designo selenite grey magno covers the muscular contours like a second skin. The widened vehicle body, the large air intakes, the diffuser and the huge rear aerofoil all signalise a desire to attack. Every modification to the bodywork has been made for the purpose of maximising power output and aerodynamic performance.

As in the roadgoing version, the vehicle structure of the GT3 consists of a very lightweight yet extremely rigid aluminium spaceframe, offering outstanding protection for the driver. The driver is further protected by the resilient carbon-fibre seat pan and an integral roll-over cage made from high-tensile steel. In order to reduce the vehicle weight further still, the engine cover, doors, front wing, front and rear aprons, sidewalls, side skirts, diffuser, boot lid and rear aerofoil are all made from particularly lightweight yet high-strength carbon-fibre.

Powerful acceleration is ensured by the seasoned and now further enhanced AMG 6.3-litre V8 engine taken from the SLS AMG GT3. User-friendly technology, excellent reliability, long maintenance intervals and the high-revving naturally aspirated engine with low running costs made it the engine of choice for the new AMG customer sports model. The six-speed sequential racing gearbox for the GT3 is - as is the case in the standard GT - mounted in a transaxle configuration on the rear axle, thereby facilitating optimum weight distribution. They also have double-wishbone suspension - made almost entirely from aluminium - in common. These solutions once again demonstrate how closely linked regular production technology and racing technology are at AMG.